Torque Testers

CHATILLON® DFS II R ND Series Digital Force Gauges
(Remote Non-Dedicated with STS Torque Sensor)
The Chatillon® DFS II Series with remote STS carries all of the features of the DFS II in a package that provides the user with the ability to perform torque measurements. The DFS II-R-ND allows the user to change STS sensors adding the flexibility of having one base indicator and several load cells to meet different testing needs.Learn more …

Shimpo TNP Torque MeterThe new Shimpo TNP torque meter is a precision instrument that measures OPEN and CLOSE torque values for various applications. As a cap torque analyzer, the TNP repeatedly determines bottle closure and breakaway torque. It has a wide memory capacity capable of storing 1,000 data points in addition to Average, Maximum and Minimum values. A HI-LO comparator feature can be utilized for large batch testing to ensure overall product quality.Learn more …
SHIMPO TRC Digital Torque CheckerThe new Shimpo TRC torque checker is a user friendly instrument for calibrating or measuring torque values. A single button process does it all. Zero, Test, Store, and repeat. In addition to Average, Maximum, Minimum, and Peak values, the TRC features Red/Green/Red LED’s (HI-GO-LO) and audible alarm. It’s wide 3,000 data points storage capacity makes large batch testing possible, insuring overall product quality.Learn more …

IMADA HTG2 Series Digital Torque GaugeThe IMADA HTG2 Series offers programmable high/low set-points for go/no-go testing. Store up to 1,000 values in memory, which can be displayed or transmitted using serial output. Use the real time mode to display toque transients, or the peak mode to capture the peak torque achieved during a test. Selectable measuring units of lbf-in, kgf-cm, or N-cm.Learn more …
IMADA DTX2 Series Cap Torque TesterIMADA’s cap torque tester offers programmable high/low set-points for go/no-go testing. Store up to 1,000 values in memory, which can be transmitted using the serial output. Use the real time mode to display torque transients, or the peak mode to capture the peak toque achieved during a test. Selectable measuring units of lbf-in, kgf-cm, or N-cm.Learn more …
IMADA’s MTG Series Motorized Cap Torque TesterIMADA’s motorized cap torque tester accommodates sample containers up to 7” in diameter and up to 9.4” in height. Torque markins on the cap vise enable consistent gripping of the cap. Operate in either clockwise or counterclowise directions. MTG series has programmable high/low set-points to enable go/no-go testing. Selectable measuring units of lbf-in, kgf-cm, or N-cm.Learn more …
IMADA Model DIS-RL Torque ScrewdriverThe IMADA Model DIS-RL Torque Screwdriver is ergonomically disigned, extremely lightweight yet good for use as a production tool. This tester has an accuracy of ±0.5%, ±21 LSD. It offers a programmable set-points for uniform tightening or go/no-go testing and also provides peak and continuous data for SPC(statistical process control) via the USB port.Learn more …
IMADA DID SeriesThe IMADA DID digital torque scredrivers feature and integral LCD display for convenient toque readings. They have an accuracy of ±0.5% F.S., ±1 LSD and programmable setpoints that provide both an audible beep and green/red LED indicator for uniform tightening or go/no-go testing.Learn more …
IMADA Model DIS-TW20Digital Torque Tester is ergonomically designed, extremely lightweight yet good for use as a production tool. This tester has an accuracy of ±0.5%, ±1 LSD and programmable set-points that provide both an audible beep and green/red LED indicator for uniform tightening or go/no-go testing and also provides peak and continuous data for SPC via the USB port.Learn more …
IMADA DIW SeriesIMADA DIW Series testers have an accuracy of ±0.5%, ±1 LSD and programmable set-points that provide both an audible beep and green/red LED indicator for uniform tightening or go/no-go testing and also provides peak and continuous data for SPC via the USB port.Learn more …
IMADA Series iThe IMADA Series i torque tester is ideal for calibrating power screwdrivers with a torque control clutch. It features peak mode to capture the peak torque achieved during a test, real time mode to display toque transients, and peak down mode to capture critical first peak value.Learn more …
IMADA Model DIS-IP The IMADA Model DIS-IP digital torque tester with flanged remote sensor calibrates torque tools up to 362lbf-ft. It has an accuracy of ±.5 F.S., ±1 LSD. Select Peak, Real Time or Peak Down measurement modes. Use the 800 internal memory for peak data recall or USB download for analysis by IMADA data acquisition software SW-1SV-USB.Learn more …
IMADA Model DI-4B-25 IMADA Model DI-4B-25 fast response torque testers are perfectly suited for on-the-spot calibration of air tools and impact drivers, but will calibrate any type of manual wrenches as well. This tester gives a digital redout of peak value in either direction and also indicate the number of blows for a selected time period. This torque tester has an accuracy of ±0.5%, ±1 LSD, Peak, Real Time and Peak Down modes, and provides peak data for SPC via the RS232 port.Learn more …
IMADA Model DI-1M IMADA Model DI-1M torque testers are perfectly suited for n-the-spot calibration of air tools and impact drivers, but will calibrate any type of power driver as well. These fast response units give a digital readout of peak value in either clockwise or counterclockwise direction and also indicate the number of blows for a selected time period from 0.1 to 9.9 seconds. These instruments have an accuracy of ±0.5%, ±1 LSD and lbf-in/lbf-ft, kgf-cm/kgf-m, or N-cm/N-m units are selectable.Learn more …
IMADA Model DWT-200 The IMADA Model DWT-200, digital torque tester incorporates a proprietary peak down capture mode that calibrates manual torque wrenches up to 1,500 lbf-in with an accuracy of ±.5% F.S., ±1 LSD. Other features include selectable Peak Down, Peak, or Real Time measurement modes and selectable units lbf-in, kgf-cm, N-m.Learn more …
IMADA Model DI-12-SL The IMADA Model DI-12-SL Motorized Torque Tester drives the test piece at consistent speed and:
1. Detects breakaway torque without overtorquing pretightened fasteners2. Detects the yield torque of the screw joint3. Displays real time torque values and captures peak torque4. Tightens fasteners to preprogrammed torque values

Learn more …

IMADA Model NTS-6 IMADA Model NTS-6 is a motorized friction torque tester that tests the smoothness of rotation of bearings, tightness of oil seals, ect while turning the sample. Torque data can be continuously output via RS-232 enabling you to display a torque profile using data acquisition software.

Learn more …