This tester is used to measure the melt flow index of thermo-plastic.
The melt flow index is acquired from the weight or the volume of the extruded specimen at a specified cylinder temperature and with a specified load of piston through the die.
The tester is assorted with an automatic cleaning system which enables to perform 1 test cycle without discontinuation (option of 3 test cycles).
No.120-SAS Specification
Specifications are subject to change without notice.
Hangings 1 or 3 Hangings (2 kinds)
Die φ2.095 ± 0.005 mm, L8.000 ± 0.025 mm
Piston Head Diameter φ9.474 ± 0.007 mm, Head Length L6.35 ± 0.10 mm
Cylinder Inner φ9.550 ± 0.007 mm, L160 mm
Temperature Range Max. 300 °C (Option: Max. 400 °C)
Initial Weight 0.325 kgf
Additional Weight 1.20 〜 21.60(※ Please refer below)
Test Method Method A: Manual (Option: Automatic)
Method B: Automatic
Specimen Feeding Automatic
Weight Loading Automatic
Weight Change Manual (Option: Automatic)
Cylinder Cleaning Automatic (Solvent Cleaning can also be Automatic)
Die Cleaning Automatic
Piston Cleaning Manual (Option: Automatic)
Die Cleaning Rod Cleaning Manual (Option: Automatic)
Cleaning Gauze Feeding Manual
Data Processing Method A: Manual (Option: Automatic)
Method B: Automatic
Method B Measuring Rotary Encoder
Software Windows Compatible
Accessories Cleaning Rod (Die, Cylinder), Solvent Cleaning Device, Specimen Cup, Cup Holder, Infundibulum, Die Gauge, Spirit Level, Dust Box, Gauze, Air Gun
Option Hastelloy Spec, Specimen Purging Device, Specimen Drying Device, Air Compressor, Temperature Calibration Device, Exhaust Fan (Standard for No.120-LABOT), Smoke-Detection Sensor (Standard for No.120-LABOT)
Additional Weight ( 1.20, 2.16, 3.80, 5.00, 10.00, 21.60 kgf.)
Power Source AC 200 V, 1-Phase, 10 A, 50/60 Hz
AC 200 V, 1-Phase, 15 A, 50/60 Hz (ISO 1133-2 Compatable Type)
Air Source 0.5 MPa or More
Don’t hesitate to contact us for more information about our company or services
Copyright © 2023 Beamar, All rights reserved.