These compact and economical test stands are ideal for low force applications with relatively small sample sizes. The ES10 and ES20 produce both tensile and compressive force up to 100 lbf (500 N). Choose between lever operation for quick tests or hand wheel operation for better control of motion. Combine these test stands with Mark-10 digital force gauges and gripping fixtures to create complete testing solutions.

The ES30 is a versatile test stand ideal for many compression and tensile testing applications.
It can accept a wide variety of sample shapes and sizes and can be configured in many positions due to modular design. Convenient side-mounted hand wheel operation enables the user to easily and accurately test up to 200 lbf (1 kN) of force, with repeatable results. Use the ES30 with any Mark-10 force gauge and force gripping fixtures to create a complete testing solution.

Shimpo’s manual test stands offer the ability to obtain accurate, consistent results without the high cost of a motorized system.

Our lever operated stands are ideal for rapid testing applications and the hand wheel stands are excellent for applications where more precise control is necessary.

Both the lever and the hand wheel stands are available in various capacities and can ensure accurate, consistent test results with the addition of a Shimpo Instruments digital or mechanical force gage.

Nearly all manufacturers’ gauges are compatible with Shimpo’s test stands for incredible versatility. These stands are designed for precision, balance, and durability. Therefore they are perfectly suited for measuring a limitless range of materials such as wire, spring, plastic, paper cord, tubing, glass and composites.

Series 2 digital force gauges are designed for basic tension and compression forcetesting applications up to 500 lbF (2,500 N). Peak tension and compression readingsare reliably captured via the gauges’ ±0.5% accuracy and 500 Hz sampling rate. Abacklit graphic LCD displays the current, peak tension, or peak compression reading.

The gauges are overload protected to 200% of capacity. An ergonomic, reversiblealuminum housing allows for hand held use or fixture mounting, rugged enough forapplications in both production and laboratory environments. Series 2 gauges are directlycompatible with Mark-10 test stands and grips.

Series 3 digital force gauges are designed for tension and compression force testing in numerousapplications from 0.12 lbF to 500 lbF (0.5 N to 2500 N). The gauges feature a sampling rate of2,000 Hz, producing accurate results under a wide range of testconditions. A backlit graphic LCD displays large characters, and amenu is available to access the gauges’ features and configurableparameters. USB output is provided for data collection purposes.

Set point indicators are provided for pass-fail testing. The gaugesare overload protected to 200% of capacity, and an analog loadbar is shown on the display for graphical representation ofapplied force.

An ergonomic, reversible aluminum housing allows for handheld use or test stand mounting for moresophisticated testing requirements. Series 3digital force gauges are directly compatiblewith Mark-10 test stands, grips, and software.

Series 3 gauges include MESUR® Lite dataacquisition software, for tabulation of continuousor individual data points. One-click exportto Excel button easily allows for further datamanipulation.

Series 4 digital force gauges are designed for tension and compression force testing in numerous applications across virtually every industry, with capacities from 0.12 lb to 500 lb (0.5 N to 2500 N). The gauges feature a sampling rate of 3,000 Hz, producing accurate results under a wide range of test conditions. Accuracy is ±0.2% of full scale, and resolution is 1/2000. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges’ many features and configurable parameters. Data can be transferred to a PC or data collectors via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.

On-board data memory for up to 50 readings is included, as are statistical calculations with output to a PC. Integrated set points with indicators and outputs are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 200% of capacity, and an analog load bar is shown on the display for graphical representation of applied force.

An ergonomic, reversible aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 4 digital force gauges are directly compatible with Mark-10 test stands, grips, and software.

Series 4 gauges include MESUR® Lite data acquisition software. MESUR® Lite tabulates continuous or single point data from Series 5 and 4 gauges. Data saved in the gauge’s memory can also be downloaded in bulk. One-click export to Excel button easily allows for further data manipulation.

Series 5 advanced digital force gauges are designed for tension andcompression force testing in numerous applications across virtuallyevery industry, with capacities from 0.12 lb to 500 lb (0.5 N to 2500N). The gauges feature an industry-leading sampling rate of 7,000 Hz,producing accurate results even for quick-action tests. A large, backlitgraphics LCD displays large, legible characters, while the simplemenu navigation allows for quick access to the gauges’ many featuresand configurable parameters. Data can be transferred to a PC or datacollectors via USB, RS-232, Mitutoyo (Digimatic), or analog outputs.

On-board data memory for up to 1,000 readings is included, as arestatistical calculations with output to a PC. Integrated set points withindicators and outputs are ideal for pass-fail testing and for triggeringexternal devices such as an alarm, relay, or test stand. The gauges areoverload protected to 200% of capacity, and an analog load bar is shownon the display for graphical representation of applied force.

The Series 5’s averaging mode addresses the need to record theaverage force over time, useful in applications such as peel testing,while external trigger mode makes switch activation testing simple andaccurate. An ergonomic, reversible aluminum design allows for hand held use or teststand mounting for more sophisticated testing requirements. Series 5 force gaugesare directly compatible with Mark-10 test stands, grips, and software.

Series 5 gauges include MESUR® Lite data acquisition software. MESUR® Lite tabulatescontinuous or single point data from Series 5 gauges. Data saved in the gauge’s memorycan also be downloaded in bulk. One-click export to Excel easily allows for further data manipulation.

The M7I professional digital force / torque indicator is designed to work with a wide range of Mark-10 remoteforce and torque sensors (see page 4). With exclusive Plug & Test® technology, all calibration and configurationdata is saved within the sensor’s smart connector, not the indicator, allowing for true interchangeability. Inaddition, all sensors are fully compatible with other Mark-10 indicators.

The M7I features an industry-leading sampling rate of 14,000 Hz, producing reliable results for extremelyquick-action tests. In addition to the M5I indicator’s functions, the M7I features high speed continuous datacapture and storage, with memory for up to 5,000 readings, at an acquisition rate of up to 14,000 Hz. The M7Ialso features programmable footswitch sequencing, break detection, and 1st / 2nd peak detection. Coefficient offriction unit of measurement and a user-defined unit of measurement add flexibility for specialized applications.For productivity enhancement, the indicator also features automatic dataoutput, data storage, and zeroing functionsupon the completion of break detection,averaging, external trigger, and 1st / 2ndpeak detection.

The M7I interfaces with Mark-10 teststands to permit functions such as breaktesting, dynamic load holding, PC controlcapability, and more. The included MESUR®Lite data acquisition software tabulatescontinuous or single point data. Datasaved in the indicator’s memory can alsobe downloaded in bulk. One-click exportto Excel easily allows for further datamanipulation.

Series F Tension / Compression Test Frames

Series F Tension / Compression Test Frames are engineered for force testing applications up to 1,500 lbf (6.7 kN). Select from a broad range of force sensor capacities and an expansive array of grips and fixtures.

Set up tests, view results, and export data via the integrated EasyMESUR® control panel. Satisfy various test methods through an easy-to-use interface, with a menu of available optional functions and function packages. The system can be tailored to your unique needs and budget, and is easily upgradeable in the field.

Virtually limitless applications
From food packaging to electronics, from consumer products to aerospace manufacturing, Mark-10 force test frames are at home in laboratory and production environments in virtually every industry worldwide.

Virtually limitless applications
From food packaging to electronics, from consumer products to aerospace manufacturing, Mark-10 force test frames are at home in laboratory and production environments in virtually every industry worldwide.

Force Measurement Re-imagined

Series F Tension / Compression Test Frames are engineered for force testing applications up to 1,500 lbf (6.7 kN). Select from a broad range of force sensor capacities and an expansive array of grips and fixtures.

Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.

Virtually limitless applications
From food packaging to electronics, from consumer products to aerospace manufacturing, Mark-10 force test frames are at home in laboratory and production environments in virtually every industry worldwide.

The MR06-200 wire crimp pull sensor is a hand-operated solution for measuring wire crimp pull-off forces. The ergonomic handles and convenient tensioning mechanism make field measurements a breeze for applications up to 200 lbf (1,000 N). Squeeze the handles together to increase tension on the sample until a break occurs. The peak force is recorded by the indicator.

A rotating turret with slots of multiple sizes accommodates a wide range of wire diameters, up to 0.25 in. (6.4 mm).

A combined certificate for the sensor and an indicator is available at time of order, part no. CERT-SI.

The lever operated TSA750 is ideal for quick-action testing of up to 750 lbf (3.75 kN) of tensile or compressive force. Made of rugged components, this test stand is durable enough for the factory floor, yet precise enough for laboratory environments. The loading lever can be positioned in 30° increments and the adjustable precision ground rack and pinion mechanism assures smooth, precise motion through 6 in. of travel.

The test stand includes adjustable travel stops and a frictional low force brake. It is available in vertical and horizontal orientations. Use this test stand with Mark-10 force gauges and gripping fixtures to create a complete push/pull testing system.